VM Creation issues ...
 
Notifications
Clear all

VM Creation issues with network

3 Posts
2 Users
0 Likes
1,088 Views
Posts: 234
Topic starter
(@hxkd)
Reputable Member
Joined: 7 years ago

Hi,

I upgraded all of our servers to 1.4.2. And it seems to be running fine so far, I have however had 2 bugs or issues, which I dont know if they supposed to be fixed in this version or not.

We have a virtual server comprised of 13 HyperV servers, 1 is a full 2012 GUI Server and the rest are HyperV core. We are using the 1 full version server to be the proxy in solid cp for the other servers.

1.) If I try to move any vm using the solidcp system, it says moved but the actual vm is still on the old server, I have to goto the db and make changes of the server id to the new server id then it all works ok again in solidcp. I am not sure if this was fixed in theis version ?

2.) I create a vm using a template running 2016, the server is created 100% ok, but the network side creates 2 interfaces one configured with a dhcp setting, this picks up the network and works fine. But the other interface is created with the selected ips I have chosen, but not linked with a switch in vm manager, and If I connect it it will not transmit packets, it received but no outgoing.. I am not sure if this is related to this issue that was previously seen in the older version fo solidcp, and maybe it needs some configuration setting changed in solidcp ? Can someone advise me further.

2 Replies
Posts: 1456
Admin
(@trobinson)
Noble Member
Joined: 8 years ago

Hello,

  1. Can you confirm if the VM does move but the panel doesnt record the change? There has been a number of improvements for HyperV Remote in 1.4.3.
  2. Would you be able to tell me if the NICs are named incorrectly inside HyperV Manager? Can you also tell me if the VM is configured to have just the External network or are you using other interfaces?

Thanks,

Trevor Robinson

Reply
Posts: 234
Topic starter
(@hxkd)
Reputable Member
Joined: 7 years ago

Hi,

the info for the vm says its on the other server in the db but, the vm is still on the original server, if I move it manually to the right path, then the vm page shows the screen of the site and can then reset and restart it etc.. It seems as if its done all the other info correctly but the actual move doesnt take place.

It basically sets up 2 adapters in the machine, although I have only selected the external network, it picks up the switch name fine. I will retry it tonight and let you know exactly so you can see.. I did create this template of windows 2016 and then sysprepped it, this did have a network card defined then, would this be the problem ?

Reply
Share: